2m USA LC/LC DUPLEX 50/125 MULTIMODE FIBER PATCH CABLE

2m USA LC/LC DUPLEX 50/125 MULTIMODE FIBER PATCH CABLE

2m USA LC/LC DUPLEX 50/125 MULTIMODE FIBER PATCH CABLE 50/125 multimode duplex fiber patch cable made in the USA



Product Features
Get the performance you demand at a price that makes sense with 50/125 multimode fiber patch cords from World of Cables. They provide higher bandwidth and transmission rates and support longer distances with lower loss than 62.5/125 fiber, but are still cost effective. Perfect for use with today's narrower aperture components, they are fully compatible with multimode applications. 50/125 multimode patch cords from World of Cables are well-suited for protocols such as Ethernet, Fibre Channel, Infiniband, ATM, and Internet Protocol.
Features: Fully compatible with multimode fiber applications
A Cost effective solution that provides lower loss and higher bandwidth supporting longer distances
Perfect for use in Gigabit Ethernet applications
Lifetime warranty against defects of materials and workmanship
Specifications:
Connectors: (2) LC to (2) LC
Buffer material: PVC
Buffer OD: 900 µm
Jacket material: PVC (OFNR-rated)
Jacket OD: 3.0 mm
Jacket color: Orange
Attenuation @850 nm: 3.75 dB/km
Attenuation @1310 nm: 1.5 dB/km
Min. bandwidth @850 nm: 160 kHz/km
Min. bandwidth @1310 nm: 500 kHz/km
Maximum tensile load: 100 N/cm
Loaded min. bend radius: 5 cm
Unloaded min. bend radius: 3 cm
Crush resistance: 750 N/cm
Impact resistance: 1000 cycles
Flex resistance: 5000 cycles
Product Specifications
Warranty: Lifetime
Color: Orange
Mfr: World of Cables
Weight: 0.1lbs

Buy to this product at www.worldofcables.com

5m USA 10Gb LC/LC DUPLEX 50/125 MULTIMODE FIBER PATCH CABLE

5m USA 10Gb LC/LC DUPLEX 50/125 MULTIMODE FIBER PATCH CABLE




Product Features

Get blazing-fast 10-Gigabit performance with laser-optimized 50/125 multimode fiber patch cords from World of Cables. Laser-optimized multimode fiber (LOMMF) cables provide backward compatibility with existing 50/125 equipment while providing the performance headroom required to support laser light sources and 10-Gigabit applications.
Features:
· Fully compatible with 50/125 multimode fiber applications

· Use with both LED and VCSEL laser light sources

· Designed for use in 10-Gigabit ethernet applications

· Lifetime warranty against defects of materials and workmanship
Specifications: · Connectors: (2) LC to (2) LC

· Type: Laser-Optimized 50/125 Multimode Duplex

· Optical Multimode 3 (OM3) fiber supporting 2000MHz.km EMB at 850nm

· 10 Gigabit transfers up to 300m using 850nm VCSEL source

· Jacket material: PVC (OFNR-rated)

· Jacket color: Aqua
Product Specifications
Warranty: Lifetime
Color: Aqua
Mfr: World of Cables
Weight: 0.16lbs



Buy to this product at www.worldofcables.com

2m MULTIMODE ST/ST DUPLEX PATCH CABLE

2m MULTIMODE ST/ST DUPLEX PATCH CABLE

Features:
World of cables offers a high-quality fiber optic patch cable designed with ST to ST termination, and is perfect for ethernet, multimedia, or communication applications. The ST connector features a bayonet locking system. The patented Injection Molding Process gives each connection greater durability in resisting pulls, strains and impacts from cabling installs. Each cable is 100% optically inspected and tested for insertion loss before you receive it. The pull-proof jacket design surrounds the popular 62.5/125 multimode fiber. Manufactured by Fiber-Conn Assemblies®, the experts in the fiber optic industry.

Connector: ST to ST
Fiber Size: 62.5/125 micron
Type: Multimode; Duplex
Features:
Bayonet locking system
100% optically inspected and tested for insertion loss
Molded form construction
Immune to electrical interference
Application: Gigabit Ethernet, FDDI, Multimedia, ATM, or any application that requires high-speed data transfer
Specifications:

Color: Orange
Size: 2m
Weight:

Buy to this product at www.worldofcables.com

10m MULTIMODE FDDI/ST DUPLEX PATCH CABLE

Description

10m MULTIMODE FDDI/ST DUPLEX PATCH CABLE

Features:

A high-quality fiber optic patch cable designed with FDDI to ST termination, and is perfect for ethernet, multimedia, or communication applications. Now, you can make your ST equipment FDDI compatible. FDDI handles network speeds of up to 100 Mbps and can be used in all multimode applications. The patented Injection Molding Process gives each connection greater durability in resisting pulls, strains and impacts from cabling installs. Each cable is 100% optically inspected and tested for insertion loss before you receive it. The pull-proof jacket design surrounds the popular 62.5/125 multimode fiber. Manufactured by Fiber-Conn Assemblies®, the experts in the fiber optic industry.

• Connector: FDDI to ST
• Fiber Size: 62.5/125 micron
• Type: Multimode; Duplex
• Features:
  • Make your ST equipment FDDI compatible
  • Color-coded connector keys
  • 100% optically inspected and tested for insertion loss
  • Molded form construction
  • Immune to electrical interference
• Application: Gigabit Ethernet, FDDI, Multimedia, ATM, or any application that requires high-speed data transfer

Specifications:

• Color: Orange
• Size: 10m
• Weight: 0.5lbs

• Buy to this product at www.worldofcables.com

5m MTP 62.5 PLENUM-RATED MULTIMODE FIBER ASSEMBLY RIBBON CABLE

5m MTP 62.5 PLENUM-RATED MULTIMODE FIBER ASSEMBLY RIBBON CABLE



Product Features:
Our MTP fiber assembly consists of twelve 62.5/125µm multimode fibers under one OFNP plenum-rated jacket. Save time and money with MTP’s increased ease of installation - simply pull one cable rather than twelve. With our MTP, it's possible to run a single cable that automatically terminates twelve fibers in one easy plug-in. The small form factor of an MTP connector provides a higher port density. Make MTP your choice for high-density fiber networks!
Specifications:
Connector: MTP Female to MTP Female
Fiber Size: 62.5/125µm x 12
Jacket Color: Orange
Jacket Type: OFNP plenum-rated jacket
Pinning: Straight Through
Type: Multimode
Features:
Easier installation
Small, rugged design
MTP connector is easy to engage and disengage with its 'push-pull' release mechanism
Latch design prevents the plug from snagging when jumper cables are being routed
Immune to electrical interference
Application: Fast Ethernet, Fibre Channel, ATM and Gigabit Ethernet
Package Contents:
5m MTP Fiber Assembly
Product Specifications:
Warranty: Lifetime
Color: Orange
Mfr: World of Cables
Weight: 0.5lbs

Buy to this product at www.worldofcables.com

2m ST/ST DUPLEX 9/125 SINGLEMODE FIBER PATCH CABLE

2m ST/ST DUPLEX 9/125 SINGLEMODE FIBER PATCH CABLE




Sailent feature:-
For your high speed singlemode fiber applications

Features:
Get the performance you demand at a price that makes sense with 9/125 singlemode fiber patch cords. They provide high bandwidth and transmission rates and support longer distances, but are still cost effective. Perfect for use with today’s high speed networks while providing headroom for tomorrow’s higher bandwidth requirements.A cost effective solution that provides higher bandwidth and support for longer distancesPerfect for use in Gigabit Ethernet applicationsHeadroom for tomorrow’s higherbandwidth needsLifetime warranty against defects of materials and workmanship
Connectors: (2) ST to (2) ST
Buffer material: PVC
Buffer OD: 900 µm
Jacket material: PVC (OFNR-rated)
Jacket OD: 3.0 mm
Jacket color: Yellow
Attenuation @1310 nm: 1.0 dB/km
Attenuation @1550 nm: 0.75 dB/km
Maximum tensile load: 100 N/cm
Loaded min. bend radius: 5 cm
Unloaded min. bend radius: 3 cm
Crush resistance: 750 N/cm
Impact resistance: 1000 cycles
Flex resistance: 5000 cycles
Specifications:

Color: Yellow
Size: 2m
Weight: 0.25lbs

Cisco Products, DVI, HDMI, Fiber Patch Cables, KVM Cables, Monitor Cables, Cat 5e, Cat 6, PCMCIA Cable, Power Cables, Projector Cables, SCSI Cables, USB, Firewire Cables, VGA Cables, Flash Cards

1m USA LC/LC DUPLEX 50/125 MULTIMODE FIBER PATCH CABLE

1m USA LC/LC DUPLEX 50/125 MULTIMODE FIBER PATCH CABLE

sailent feature :
1m USA LC/LC DUPLEX 50/125 MULTIMODE FIBER PATCH CABLE
50/125 multimode duplex fiber patch cable made in the USA
Product Features Get the performance you demand at a price that makes sense with 50/125 multimode fiber patch cords from World of Cables. They provide higher bandwidth and transmission rates and support longer distances with lower loss than 62.5/125 fiber, but are still cost effective. Perfect for use with today's narrower aperture components, they are fully compatible with multimode applications. 50/125 multimode patch cords from World of Cables are well-suited for protocols such as Ethernet, Fibre Channel, Infiniband, ATM, and Internet Protocol.


Features:
Fully compatible with multimode fiber applications
A Cost effective solution that provides lower loss and higher bandwidth supporting longer distances
Perfect for use in Gigabit Ethernet applications
Lifetime warranty against defects of materials and workmanship
Specifications:

Connectors: (2) LC to (2) LC
Buffer material: PVC
Buffer OD: 900 µm
Jacket material: PVC (OFNR-rated)
Jacket OD: 3.0 mm
Jacket color: Orange
Attenuation @850 nm: 3.75 dB/km
Attenuation @1310 nm: 1.5 dB/km
Min. bandwidth @850 nm: 160 kHz/km
Min. bandwidth @1310 nm: 500 kHz/km
Maximum tensile load: 100 N/cm
Loaded min. bend radius: 5 cm
Unloaded min. bend radius: 3 cm
Crush resistance: 750 N/cm
Impact resistance: 1000 cycles
Flex resistance: 5000 cycles
Product Specifications

Warranty: Lifetime
Color: Orange
Mfr: World of Cables
Weight: 0.08lbs

Buy Fiber Cables at www.worldofcables.com